Icon The Airmada
motorcycle helmet
- body smaller
- weight less
- aerodynamics are better
- ventilation is better
- overview more
Characteristics
- It has been tested and meets all safety standards in the United States, Japan, Europe, Australia.
- Molded polycarbonate shell for strength and durability
- Recessed dual channel air inlet/outlet ports provide quality air circulation
- New visor "Icon Optics" with Pro-Lock system-opening protection
- Adjustable ventilation system on the chin and in the frontal area maintains a constant temperature for greater comfort in all driving circumstances
- Quality graphics
- New system for quick removal of visor
- Removable cast breath deflector helps prevent fogging
- Fully removable inner "HydraDry" wash pillows
- The helmet is available in four body sizes elongated oval shape for the most accurate fit and comfort
Excellent combination of functionality and style. This helmet is perfect for both city driving and for sports races on the track. The cast polycarbonate case is taken as a basis. In terms of aerodynamics, landing, ventilation and comfort-this is a completely new model of the helmet.
One of the novelties about this helmet is that we now have four body sizes at our disposal – the manufacturer has put a lot of emphasis on fit. In comparison, the Alliance helmet range was available in just two body sizes, and the Airframe in three – with the third, largest body only being used for the size 3 XL . Thus, the helmet line "Airmada" wakes up an order of magnitude better fit the driver's face, leaving no space inside. Hence we have improved aerodynamics – than less helmet, the less and the flow of oncoming air – respectively rider dynamics of longer tired during hour.
Ventilation has also been improved. Now we have 7 channels for fresh air intake, and 6 ports for exhaust. As in previous models, we have channels in the oral area, as well as two side ports that are adjustable in several positions on the inside of the helmet. Above there is a ten-millimeter double channel, which, as before, is convenient to control-in the closed or open position. And one of the novelties is nearby-a double adjusting port, which in addition to all the previous ones, directs the flow of fresh directly to the frontal part of the driver. Accordingly, the hot air comes out through the rear ports-two on top, two on the sides and two on the bottom side.
Another innovation is - specially designed for the line "Airmada" visor "Optics". It is somewhat larger than its predecessors, has a special coating against fogging, flexible and durable – and what is interesting – this visor gives you a viewing angle of five degrees more than in previous models. There is a "Pro-Lock" opening protection. And another big plus is that the visor has become much easier to remove. All you need – is to raise it to the limit, press the side clamps, and the visor is easily disconnected. To put it back on, insert the visor until it clicks – and close the helmet. Compared with previous models – replacing the visor now becomes a matter of a couple of seconds.
All internal pillows absorb moisture, are easily removed for washing and installed in the same way. The most reliable fixation system is used-D-shaped ring-clasp, so that the helmet does not unfasten under any circumstances. Removable breath deflector helps prevent fogging.
In addition to improved performance, the helmet "Airmada" is available in various graphic colors. There are reflective models, female versions, as there is a black matte case.
So, an advanced level of ventilation, improved landing, new high-quality graphics, a new visor - and all this is a new helmet Icon Airmada .
Примечание для покупателей:
Визор (забрало) идущий в комплекте с мотошлемом или приобретаемый отдельно – это специальный защитный элемент мотошлема со сложным химическим составом, способствующим безопасности и комфорту во время движения на мотоцикле. Заводская пленка, в которую он упакован, защищает поверхность визора от повреждений при его транспортировке и хранении до начала эксплуатации, сохраняя надлежащий его товарный вид и потребительские свойства. Не рекомендуется снимать или повреждать заводскую пленку визора мотошлема до принятия уверенного решения о его приобретении. Заводская упаковка – составляющая первоначального вида.
Инструкция по уходу за визором: смочить микрофибру в теплой воде, накрыть визор, через 3 минуты аккуратно смыть под струей воды и оставить высыхать. При необходимости протереть рукой с мыльным раствором и смыть под струей воды. На внутреннюю сторону визора не наносить очищающие средства и не протирать, во избежании повреждения антифог покрытия. Допускает использование специальных чистящих средств, не нарушающих покрытие визора, только на внешней стороне. Перед применением проверяйте средство на незначительном участке поверхности. Магазин не несет ответственности за применение химических средств.
Цвет товара может незначительно отличаться т.к. фотосъемка изделия выполнена в студийных условиях при специальном освещении. Производитель может незначительно менять оттенок или незначительные элементы дизайна на свое усмотрение в зависимости от партии без предварительного уведомления.
В целях обеспечения гигиены шлем можно примерять только в подшлемнике. Это касается примерки при доставке и в магазине. Возьмите с собой подшлемник или приобретите в магазине по специальной цене. Одноразовые шапочки не закрывают всю площадь лица, поэтому мы их не используем.